First Thanks for Help
-----Ursprüngliche Nachricht-----
Von: Herbert Poetzl [mailto:herbert@13thfloor.at]
Gesendet: Mittwoch, 08. März 2006 19:48
An: Roman Pretory
Cc: vserver@list.linux-vserver.org
Betreff: Re: [Vserver] Network, Shapping, util
On Wed, Mar 08, 2006 at 04:34:06PM +0100, Roman Pretory wrote:
> Hello
>
> A lot of Questions.... :-)
> Maybe one have answers or ideas
>
> Thanks Roman
>
>
#===========================================================================
> ====================
>
> 1) seperate Network on node
>
> have a node with 2 nics
>
> eth0 is 192.168.2.2/255.255.255.0 connected to Zywall LAN-Interface
> eth1 is 10.0.0.1/255.255.255.0 connected to Zywall DMZ-Interface
>
> How to seperate the vservers to be only in DMZ /LAN without lossing
> the connection to Internen (Gateway) and be shure that no connact is
> possibe from LAN to DMZ over the Node
>
> and able to connect server vom LAn in the DMZ
>
> Have played a long time with iptables and networkconfigs no idea left
> to test :-(
http://archives.linux-vserver.org/200311/0470.html
from http://linux-vserver.org/Documentation (Archived Knowledge)
It will Help
Thanks
>
#===========================================================================
> ====================
>
> 2) Shapping CPU / set limit on CPU
>
> is it possible to give a vserver only 50% of the cpu or better to
> give 10% fix and if free more or up to xx% like cir/eir
http://linux-vserver.org/Scheduler+Parameters
(same source, Howtos)
latest devel versions support setting two pairs of
scheduler parameters, one for the 'guarantee' and
another one for the idle case, which allows to utilize
otherwise unused cpu resources
devel?!
how long you think for stabil
is it usable only with util or also with Vserver
I need it for produktion use
is there a group for beta testing is there a place free or could i help?!
>
#===========================================================================
> ====================
>
> 3) traffice shaping
>
> have anyone a working howto already testet and running in production mode
> seperate node, vservers and services per vserver/node
TC is your friend here ...
Thanks I have already meet "him" :-)
Only need Infos of Produktion experiences, to make not errors twice
>
#===========================================================================
> ====================
>
> 4) move from vserver: 0.40 to util-vserver
>
> exist a howto??
> convert vserver possible --without loosing anything
> <http://www.13thfloor.at/vserver/d_rel26/v1.9.1/util-vserver-0.29.5.tar>
hmm, you probably want util-vserver 0.30.210, the config
is described on the FlowerPage (referenced on the main page)
and probably the simplest way to 'upgrade' the config is
one of the scripts floating around to do that, or alternatively
the -m skeleton build method which should be quite simple
to use to get a new config ...
HTH,
Herbert
NO I don`t but if I read the pages
(http://www.13thfloor.at/vserver/s_rel26/v2.01/)
there is no info about vserver only util
so I think this is the future or the better way, is it??
or is vserver so good as
as i testet maybe by version patch 28 for kernel 2.4.xx util make a lot of
troubles I can't get it to run clean,
vservers works there are rpm so no wish by install perfect
Thanks
Roman
>
#===========================================================================
> ====================
>
> Config:
>
> Kernel: 2.6.12.3 / 2.6.14.7
> patch: 2.0 / 2.01
> vserver: 0.40
> node:fc3
> hosts rh 9/fc1-3 /debian
>
>
#===========================================================================
> ====================
>
>
> _______________________________________________
> Vserver mailing list
> Vserver@list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Wed Mar 8 20:22:49 2006