From: Herbert Poetzl (herbert_at_13thfloor.at)
Date: Tue 07 Jan 2003 - 03:25:27 GMT
On Mon, Jan 06, 2003 at 08:32:30PM -0500, Dinesh Mistry wrote:
> Yup the IP is correct, tried that already.
>
> No errors on VPS start up
your problem is trivial, although not obvious.
#define IFNAMSIZ 16
char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
"eth0:" (5 chars)
"televendor" (10 chars)
"\0" (1 char)
but the multiple ip stuff in vserver works by
adding numbers to the server name to build the
alias names ...
eth0:televendor1
eth0:televendor2
...
which results in the same alias name used for
all your ips ... so only the last one is permanent
best,
Herbert
> START UP
>
> Starting the virtual server televendor
> Server televendor is not running
> ipv4root is now 66.78.30.187 66.78.30.185
> Host name is now televendors.com
> New security context is 28
> ---------------------------------------------------------------
> CONFIG -
>
> if [ "" = "" ]; then
> PROFILE=prod
> fi
> case $PROFILE in
> prod)
> IPROOT="66.78.30.187 66.78.30.185"
> IPROOTDEV=eth0
> S_HOSTNAME=televendors.com
> ;;
> backup)
> IPROOT=""
> IPROOTDEV=eth0
> S_HOSTNAME=
> ;;
> esac
> ONBOOT=yes
> S_DOMAINNAME=
> S_NICE=
> S_FLAGS="lock nproc"
> ULIMIT="-H -u 128"
> S_CAPS="CAP_NET_RAW"
>
> -----------------------------------------------------------------
>
> IFCONFIG
>
> eth0:tele Link encap:Ethernet HWaddr 00:04:E2:0B:41:62
> inet addr:66.78.30.185 Bcast:66.78.30.191 Mask:255.255.255.240
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> Interrupt:11
>
> --------------------------------------------
> Dinesh Mistry
>
> YourHostDirect
> 1-800-210-6757
>
> Better, Faster and more Reliable Hosting
> http://www.yourhostdirect.com
> --------------------------------------------
>
>
> -----Original Message-----
> From: Volker Buschmans [mailto:Volker_at_buschmans.de]
> Sent: Monday, January 06, 2003 7:42 PM
> To: vserver_at_solucorp.qc.ca
> Subject: RE: [vserver] multiple ips 2.4.20 ctx16
>
> May be,
>
> (I'm sorry, I missed the initial mails, so I don't know the whole story...)
> Are you sure the IP is correct (inside your network, not yet in use, ...)?
> How many VServers are allready running?
> Are there errors during the VServer startup?
> perhaps (if not too dangerous for you) you could drop the configfie(s) (w/o
> comments) and ifconfig
> ethX to the list...
>
> Volker
>
> Buschmans I.F.M.
>
> http://www.buschmans.de
>
>
>
> On Mon, 6 Jan 2003 01:22:19 -0500, Dinesh Mistry wrote
> [snip]
> > Now the one thing that might but should not have affect is that the
> network
> > block assigned to me is a /28 but I have no idea how that would affect
> [snip]
> >
> > --------------------------------------------
> > Dinesh Mistry
> >
> > YourHostDirect
> > 1-800-210-6757
> >
> > Better, Faster and more Reliable Hosting
> > http://www.yourhostdirect.com
> > --------------------------------------------
> >
> > -----Original Message-----
> > From: Cathy Sarisky [mailto:cathy_at_acornhosting.net]
> > Sent: Monday, January 06, 2003 12:31 AM
> > To: vserver_at_solucorp.qc.ca
> > Subject: RE: [vserver] multiple ips 2.4.20 ctx16
> >
> > You'd see this if the other IPs couldn't be bound, of course, but there
> > would be error messages to go with it. ifconfig in the host server shows
> > the ips you want to bind? If you shuffle around the order in the IPROOT=
> > line, do you still see the last IP getting bound?
> >
> > Apologies if you're way beyond this point in debugging this one.
> >
> > On Mon, 6 Jan 2003, Dinesh Mistry wrote:
> >
> > > I know I brought this up a while ago but I am still running in to the
> same
> > > problem I have installed another host vserver and am unable to replicate
> > the
> > > same problem, everything is identical the kernel the patch level.
> > >
> > > I am trying to add more than 1 IP to a vserver but on this one machine
> > when
> > > I edit the config file and the 2 IP's in IPROOT=" " section of the
> config
> > > file.
> > >
> > > The vserver comes up fine but it just takes the last IP Address I enter
> in
> > > the config file. I have rebooted the host server hoping it was something
> > > strange where the IP was locked/(or something weird) but I still can not
> > get
> > > it to work with multiple IP's
> > >
> > > I have created the same vserver name and everything trying to mimic the
> > > identical configuration with no avail.
> > >
> > > Is there anything I can check to see what is causing the is problem has
> > any
> > > one seen anything this strange?
> > >
> > > --------------------------------------------
> > > Dinesh Mistry
> > >
> > > YourHostDirect
> > > 1-800-210-6757
> > >
> > > Better, Faster and more Reliable Hosting
> > > http://www.yourhostdirect.com
> > > --------------------------------------------
> > >
> > >
> > >
> > >
> > >
> > >
> > >
>