From: Dinesh Mistry (dmistry_at_yourhostdirect.com)
Date: Tue 07 Jan 2003 - 01:32:30 GMT
Yup the IP is correct, tried that already.
No errors on VPS start up
START UP
Starting the virtual server televendor
Server televendor is not running
ipv4root is now 66.78.30.187 66.78.30.185
Host name is now televendors.com
New security context is 28
---------------------------------------------------------------
CONFIG -
if [ "" = "" ]; then
PROFILE=prod
fi
case $PROFILE in
prod)
IPROOT="66.78.30.187 66.78.30.185"
IPROOTDEV=eth0
S_HOSTNAME=televendors.com
;;
backup)
IPROOT=""
IPROOTDEV=eth0
S_HOSTNAME=
;;
esac
ONBOOT=yes
S_DOMAINNAME=
S_NICE=
S_FLAGS="lock nproc"
ULIMIT="-H -u 128"
S_CAPS="CAP_NET_RAW"
-----------------------------------------------------------------
IFCONFIG
eth0:tele Link encap:Ethernet HWaddr 00:04:E2:0B:41:62
inet addr:66.78.30.185 Bcast:66.78.30.191 Mask:255.255.255.240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:11
--------------------------------------------
Dinesh Mistry
YourHostDirect
1-800-210-6757
Better, Faster and more Reliable Hosting
http://www.yourhostdirect.com
--------------------------------------------
-----Original Message-----
From: Volker Buschmans [mailto:Volker_at_buschmans.de]
Sent: Monday, January 06, 2003 7:42 PM
To: vserver_at_solucorp.qc.ca
Subject: RE: [vserver] multiple ips 2.4.20 ctx16
May be,
(I'm sorry, I missed the initial mails, so I don't know the whole story...)
Are you sure the IP is correct (inside your network, not yet in use, ...)?
How many VServers are allready running?
Are there errors during the VServer startup?
perhaps (if not too dangerous for you) you could drop the configfie(s) (w/o
comments) and ifconfig
ethX to the list...
Volker
Buschmans I.F.M.
On Mon, 6 Jan 2003 01:22:19 -0500, Dinesh Mistry wrote
[snip]
> Now the one thing that might but should not have affect is that the
network
> block assigned to me is a /28 but I have no idea how that would affect
[snip]
>
> --------------------------------------------
> Dinesh Mistry
>
> YourHostDirect
> 1-800-210-6757
>
> Better, Faster and more Reliable Hosting
> http://www.yourhostdirect.com
> --------------------------------------------
>
> -----Original Message-----
> From: Cathy Sarisky [mailto:cathy_at_acornhosting.net]
> Sent: Monday, January 06, 2003 12:31 AM
> To: vserver_at_solucorp.qc.ca
> Subject: RE: [vserver] multiple ips 2.4.20 ctx16
>
> You'd see this if the other IPs couldn't be bound, of course, but there
> would be error messages to go with it. ifconfig in the host server shows
> the ips you want to bind? If you shuffle around the order in the IPROOT=
> line, do you still see the last IP getting bound?
>
> Apologies if you're way beyond this point in debugging this one.
>
> On Mon, 6 Jan 2003, Dinesh Mistry wrote:
>
> > I know I brought this up a while ago but I am still running in to the
same
> > problem I have installed another host vserver and am unable to replicate
> the
> > same problem, everything is identical the kernel the patch level.
> >
> > I am trying to add more than 1 IP to a vserver but on this one machine
> when
> > I edit the config file and the 2 IP's in IPROOT=" " section of the
config
> > file.
> >
> > The vserver comes up fine but it just takes the last IP Address I enter
in
> > the config file. I have rebooted the host server hoping it was something
> > strange where the IP was locked/(or something weird) but I still can not
> get
> > it to work with multiple IP's
> >
> > I have created the same vserver name and everything trying to mimic the
> > identical configuration with no avail.
> >
> > Is there anything I can check to see what is causing the is problem has
> any
> > one seen anything this strange?
> >
> > --------------------------------------------
> > Dinesh Mistry
> >
> > YourHostDirect
> > 1-800-210-6757
> >
> > Better, Faster and more Reliable Hosting
> > http://www.yourhostdirect.com
> > --------------------------------------------
> >
> >
> >
> >
> >
> >
> >