Re: [Vserver] vserver fubar build -m yum is not working for me.

From: Herbert Poetzl <herbert_at_13thfloor.at>
Date: Thu 17 Aug 2006 - 20:56:28 BST
Message-ID: <20060817195628.GB1273@MAIL.13thfloor.at>

On Mon, Aug 14, 2006 at 10:57:50AM -0400, Gregory L Miller-Kramer wrote:
> Thank you for replying Herbert.
>
> Herbert Poetzl wrote:
> >On Fri, Aug 11, 2006 at 12:51:35PM -0400, Gregory L Miller-Kramer wrote:
> >
> >>TWIMC, (To Whom It May Concern)
> >>
> >> I have done this before (VServers and CentOS) and I have created
> >>quite a few VServers in the past. So, I am retracing familiar steps.
> >>
> >> I installed CentOS 4.3, NO SELinux, and no GUI. I followed the best
> >>set of steps for creating a CentOS VServer Host.
> >>(http://linux-vserver.org/CentOS_HowTo and
> >>http://linux-vserver.org/Step-by-Step+Guide+2.6) I do the step where I
> >>will be taking a coffee break :-) while the host downloads (and
> >>installs) all the RPM's via Yum and it fails. So, no coffee :-( .
> >>
> >>vserver min-centos4 build -m yum --hostname domain.com --interface
> >>domain=eth0:192.168.0.136/24 --initstyle sysv --context 500 --force -- -d
> >>centos4
> >>
> >>I get this...
> >>rpm-fake-resolver: vc_ctx_migrate(): No such process
> >>rpm-fake.so: failed to initialize communication with resolver
> >>
> >could you run testme.sh and add the output here too?
> >
> [toor util-vserver-0.30.210]# ./testme.sh
> Linux-VServer Test [V0.15] Copyright (C) 2003-2006 H.Poetzl
> chcontext is working.
> chbind is working.
> Linux 2.6.17.7-vs2.0.2-rc28 #2 SMP Fri Aug 11 14:05:42 EDT 2006 i686
> Ea 0.30.210 273/glibc (DSa) <v13,net>
> VCI: 0002:0001 273 03000076 (TbLgnP)
> ---
> [000]# succeeded.
> [001]# succeeded.
> [011]# succeeded.
> [031]# succeeded.
> [101]# succeeded.
> [102]# succeeded.
> [201]# succeeded.
> [202]# succeeded.
> >>I have looked throughout google and the vserver lists but nothing
> >>useful. This did work about 2 months ago because I followed the steps
> >>and was able to do it when I created another machine. The machines are
> >>physically different but I don't see how that would cause this.
> >>
> >>I used dietlibc and when I did the configure of 0.30.210 (util-vserver)
> >>I get this. ( it is long, sorry)
> >>
> 8< --- sorry about that --- 8<
> >the part below is usually sufficient, and you
> >can easily get it with vserver-info - SYSINFO
> >(JFYI)
> >
> >>util-vserver 0.30.210
> >>
> >>Features:
> >> CC: gcc, gcc (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2)
> >> CXX: g++, g++ (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2)
> >> CPPFLAGS: ''
> >> CFLAGS: '-g -O2 -std=c99 -Wall -pedantic -W
> >>-funit-at-a-time'
> >> CXXFLAGS: '-g -O2 -ansi -Wall -pedantic -W
> >>-fmessage-length=0 -funit-at-a-time'
> >> build/host: i686-pc-linux-gnu/i686-pc-linux-gnu
> >> Use dietlibc: yes
> >> Build C++ programs: yes
> >> Build C99 programs: yes
> >> Available APIs: v13,net
> >> ext2fs Source: e2fsprogs
> >> syscall(2) invocation: alternative
> >> vserver(2) syscall#: 273/glibc
> >>
> >>Paths:
> >> prefix: /usr
> >> sysconf-Directory: /etc
> >> cfg-Directory: /etc/vservers
> >> initrd-Directory: $(sysconfdir)/init.d
> >> pkgstate-Directory: ${prefix}/var/run/vservers
> >> vserver-Rootdir: /vservers
> >>
> >>I should also note, it's the same version for kernel, vserver patch and
> >>util-vserver as the previous machines I have working.
> >
> >so _what_ exactly changed?

I'm pretty sure that the repository changed here,
maybe you could try with a different repo definition?

best,
Herbert

> >TIA,
> >Herbert
> >
> That's just it. I didn't change anything. I am following the same
> process that I did when I created the other servers.
>
> I install with CentOS 4.3, don't update, and follow the process on those
> mentioned links.
>
> I am about to try running a downloaded vserver on this machine.
>
> Is there a way to activate more detailed debugging to give more info as
> to why it's failing the yum?
>
> TIA, (hadn't used this one before, assuming "Thanks In Advance")
> Greg
>
> --
> This message has been scanned for viruses and
> dangerous content, and is believed to be clean.
>
> _______________________________________________
> Vserver mailing list
> Vserver@list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Thu Aug 17 20:56:57 2006

[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Thu 17 Aug 2006 - 20:57:02 BST by hypermail 2.1.8