On Tue, 2006-08-15 at 02:33 +0200, Daniel Hokka Zakrisson wrote:
> Jim Wight wrote:
> > My setup is 2.6.14.3-vs2.0.1 with 0.30.210. The vserver was created by
> > dumping an installation on hardware and restoring it to /vservers/fc5
> > and then:
>
> One of my FC4 hosts is using 2.6.17-1.2142_FC4.vs2.0.2.0.rc26.1smp with
> util-vserver-0.30.210-20.fc4, and it can run FC5 guests without any
> problems. Any chance you could try with the RPMs? (I'll try to reproduce
> your issue once I get FC4 installed on the test box).
I've installed util-vserver with the aid of dhozac.repo on an FC4 host
followed by an FC5 guest. It starts:
# which vserver
/usr/sbin/vserver
# vserver gast start
Bringing up loopback interface: Device lo does not seem to be present,
delaying initialization.
[FAILED]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Mounting other filesystems: [ OK ]
When I switch to using the util-vserver-0.30.210 I built I get my
problem back:
# which vserver
/addon/local/util-vserver/current/sbin/vserver
# echo "/addon/local/util-vserver/0.30.210/lib/util-vserver/vshelper" >/proc/sys/kernel/vshelper
# vserver gast start
/usr/bin/env: /lib/libc.so.6: version `GLIBC_2.4' not found (required by /usr/bin/env)
However, since doing that I have made a discovery. If I change the line
_ENV="/usr/bin/env"
to
_ENV="/bin/env"
in util-vserver-vars then my original FC5 guest starts fine using my
build of util-vserver.
/usr/bin/env is a symbolic link to ../../bin/env.
Jim
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Tue Aug 15 16:16:53 2006