hi,
I figured this out. I used a symlink like /etc/vserver/GUEST ->
real_guest_conf_dir,
it was causing the problem.
thanks
--Alex
On 7/19/06, Daniel Hokka Zakrisson <daniel@hozac.com> wrote:
> Alexander Kabanov wrote:
> > hi there,
> >
> > I have the following error message when run "vserver GUEST start"
> >
> > vlimit: fstat("/etc/vservers/GUEST/rlimits"): Permission denied
> >
> > An error occured while executing the vserver startup sequence; when
> > there are no other messages, it is very likely that the init-script
> > (/etc/rc.d/rc 3) failed.
> >
> > server os fedora core 5
> > guest fedora core 4
> > 2.6.16.17-vs2.0.2-rc21
> >
> > how do I diagnose this?
>
> Do you get anything in the host's dmesg? Maybe something about a
> barrier? If so, you'd want to run showattr -d / /etc /etc/vservers
> /etc/vservers/GUEST to see which directory has the barrier set, but
> shouldn't.
>
> --
> Daniel Hokka Zakrisson
> GPG id: 06723412
> GPG fingerprint: A455 4DF3 990A 431F FECA 7947 6136 DDA2 0672 3412
> _______________________________________________
> Vserver mailing list
> Vserver@list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
>
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Wed Jul 19 19:00:11 2006