On Thu, Mar 23, 2006 at 04:50:17PM -0000, John Lyons wrote:
> > (for whatever reason), check inside the guest with
> > cat /proc/self/status and verify your configuration
>
> We're using a precompiled FC4 kernel from the wikki which is working fine on
> other boxes of the same type and build.
>
> This is the status from two vservers on the host. Slightly lost with the IP
> translation sorry.
>
> [root@vs230 /]# cat /proc/self/status
> Name: cat
> State: R (running)
> SleepAVG: 88%
> Tgid: 20337
> Pid: 20337
> PPid: 20309
> TracerPid: 0
> Uid: 0 0 0 0
> Gid: 0 0 0 0
> FDSize: 256
> Groups: 0 1 2 3 4 6 10
> VmPeak: 1672 kB
> VmSize: 1672 kB
> VmLck: 0 kB
> VmHWM: 472 kB
> VmRSS: 472 kB
> VmData: 32 kB
> VmStk: 84 kB
> VmExe: 16 kB
> VmLib: 1512 kB
> VmPTE: 20 kB
> StaBrk: 0804d000 kB
> Brk: 09f10000 kB
> StaStk: 5f93f5e0 kB
> ExecLim: ffffffff
> Threads: 1
> SigQ: 0/7167
> SigPnd: 0000000000000000
> ShdPnd: 0000000000000000
> SigBlk: 0000000000000000
> SigIgn: 0000000000000000
> SigCgt: 0000000000000000
> CapInh: 0000000000000000
> CapPrm: 00000000344c14ff
> CapEff: 00000000344c14ff
> s_context: 49173
> ctxflags: 202020010
> initpid: 0
> ipv4root: e65f45c3/00ffffff 0100007f/000000ff
> ipv4root_bcast: ffffffff
>
>
>
> root@vs131 /]# cat /proc/self/status
> Name: cat
> State: R (running)
> SleepAVG: 88%
> Tgid: 20592
> Pid: 20592
> PPid: 20081
> TracerPid: 0
> Uid: 0 0 0 0
> Gid: 0 0 0 0
> FDSize: 256
> Groups: 0 1 2 3 4 6 10
> VmPeak: 1716 kB
> VmSize: 1716 kB
> VmLck: 0 kB
> VmHWM: 508 kB
> VmRSS: 508 kB
> VmData: 32 kB
> VmStk: 88 kB
> VmExe: 16 kB
> VmLib: 1552 kB
> VmPTE: 16 kB
> StaBrk: 0804d000 kB
> Brk: 09f9d000 kB
> StaStk: 5f8afb40 kB
> ExecLim: ffffffff
> Threads: 1
> SigQ: 0/7167
> SigPnd: 0000000000000000
> ShdPnd: 0000000000000000
> SigBlk: 0000000000000000
> SigIgn: 0000000000000000
> SigCgt: 0000000000000000
> CapInh: 0000000000000000
> CapPrm: 00000000344c14ff
> CapEff: 00000000344c14ff
> s_context: 49180
> ctxflags: 202020010
> initpid: 0
> ipv4root: 835f45c3/00ffffff 0100007f/000000ff
> ipv4root_bcast: ffffffff
why do you add 127.0.0.1 to the guest config?
best,
Herbert
> John
>
> _______________________________________________
> Vserver mailing list
> Vserver@list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Thu Mar 23 16:51:42 2006