On Thu, Mar 23, 2006 at 01:43:28PM -0000, John Lyons wrote:
>
> This is what we've got
>
> Linux svr26.xxxxxxx 2.6.15-1.1833_FC4.vs2.0.2.0.rc10.1 #1 Thu Mar 2 12:57:13
> EST 2006 i686 athlon i386 GNU/Linux
>
> util-vserver-devel-0.30.210-4.fc4
> util-vserver-build-0.30.210-4.fc4
> util-vserver-lib-0.30.210-4.fc4
> util-vserver-legacy-0.30.210-4.fc4
> util-vserver-0.30.210-4.fc4
> util-vserver-core-0.30.210-4.fc4
> util-vserver-sysv-0.30.210-4.fc4
>
>
> The problem is that v_httpd which calls
> /usr/lib/util-vserver/vsysvwrapper httpd start
> is binding to 0.0.0.0:80 on the host server so no vservers can start httpd
>
> If I stop v_httpd and start apache on a vserver then httpd starts on the
> vserver as 0.0.0.0:80 and neither the host nor any other vserver on the box
> can then start apache.
it looks like your guest has no IP address assigned
(for whatever reason), check inside the guest with
cat /proc/self/status and verify your configuration
maybe something in your setup is broken, trying with
a vanilla kernel+patch and util-vserver compiled from
scratch might be worth a try (make sure to use dietlibc)
HTH,
Herbert
> If I set the listen and bind directives within the vservers httpd.conf file
> to set the vservers IP address and port 80 then apache fails with the error
> below even though there are no apache process running anywhere on the host
> or other vservers and nothing is bound to port 80
> [crit] (98)Address already in use: make_sock: could not bind to port 80
>
> Any clues on a fix, I've spent the best part of 2 hours trying to figure out
> what the problem is.
>
> Regards
>
> John
>
>
>
> _______________________________________________
> Vserver mailing list
> Vserver@list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Thu Mar 23 16:34:35 2006