From: smagnuson_at_forzani.com
Date: Thu 12 May 2005 - 15:28:36 BST
I was originally doing it that way but Herbert recommended this way. I have not experienced any issues so far.
sig
-----Original Message-----
From: vserver-bounces_at_list.linux-vserver.org
[mailto:vserver-bounces_at_list.linux-vserver.org]On Behalf Of Björn
Steinbrink
Sent: Thursday, May 12, 2005 8:21 AM
To: vserver_at_list.linux-vserver.org
Subject: Re: [Vserver] Official copy method?
Hello,
On 2005.05.12 07:48:27 -0600, smagnuson_at_forzani.com wrote:
> * Set up vserver barrier
>
> sudo showattr -d /vservers/vcrux02
> ---bui- /vservers/vcrux02
> sudo setattr --barrier /vservers/vcrux02
> sudo showattr -d /vservers/vcrux02
> ---Bui- /vservers/vcrux02
the barrier flag is supposed to be set on /vservers (i.e. the directory
directly above the vserver's root directory). Not sure if setting the
flag on the vserver's root itself may cause problems with 2.6 kernels.
HTH
Björn
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver