[Vserver] Can't set the ipv4 root:
 vserver development mailing list 
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
About this list Date view Thread view Subject view Author view Attachment view

From: Tad Truex (tad_at_oldtools.org)
Date: Wed 27 Oct 2004 - 04:26:25 BST

Greetings,

I have built a 2.6.8.1 kernel with the 1.9.2 verser patch cleanly
applied and (I believe) correctly configured.

I have built what I believe is a functional relatively minimal FC2 root
directory. I used the install-fc1 script from util-vserver version 0.30
as a basis for my install.

I have set IPROOT to eth1:192.168.1.30 in my config . (eth1 is the
device on the 192.168.1.0/24 subnet)

When I try to start the vserver I get the following.

[root_at_bertha util-vserver]# vserver fc2 start
Starting the virtual server fc2
Server fc2 is not running
Can't set the ipv4 root (Function not implemented)

Any one have a thought about where I should look for the source of the
problem? (I checked google and the util-vserver source, but didn't turn
anything up...)

Thanks in advance,
Tad
 

_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver

About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Wed 27 Oct 2004 - 13:12:59 BST by hypermail 2.1.3