About this list Date view Thread view Subject view Author view Attachment view

From: Bill Brigden (bill_at_baghead.co.uk)
Date: Thu 05 Dec 2002 - 16:19:30 GMT


You probably have the SSH daemon on the root server binding to all
addresses - checkout the same config file on the root server - and set to
.1.10 and restart ssh

That should do it..

----- Original Message -----
From: "Kapeller Rene PSI" <rene.kapeller_at_psi.ch>
To: <vserver_at_solucorp.qc.ca>
Sent: Thursday, December 05, 2002 3:39 PM
Subject: Re: [vserver] Patch for RedHat kernel-source-2.4.18-14.i386.rpm

> Darryl,
> sorry for my dumm question.
> Meanwhile I have done exactly with a 2.4.19 kernel what you suggested
> and things work fine, except:
>
> I have a 'root-server' on 'xxx.xxx.1.10'
> and I have a 'vserver1' running with
> IPROOT="xxx.xxx.1.11"
> IPROOTDEV=eth0
> and I can successfily 'start' and 'enter' the 'vserver1'.
> But if I try to connect to 'vserver1' via ssh, I end up in a session on
> the 'root-server'.
>
> I even set
> ListenAddress xxx.xxx.1.11
> in /etc/ssh/sshd_conf on the 'vserver1', but it does not help either.
>
> Hmmmm...?
>
> - Rene
>
> Darryl Engle wrote:
> > Rene,
> > When configuring the kernel chose the "Code Maturity Level Option" then
> > check "Prompt for Development and/or Incomplete Code/Drivers" and your
> > SCSI_AACRAID driver/module should show up under the SCSI options, it
should
> > be there now, just greyed out. E-mail me if you need more help.
> >
> >
> >>-----Original Message-----
> >>From: Kapeller Rene PSI [mailto:rene.kapeller_at_psi.ch]
> >>Sent: Wednesday, December 04, 2002 11:33 PM
> >>To: vserver_at_solucorp.qc.ca
> >>Subject: [vserver] Patch for RedHat kernel-source-2.4.18-14.i386.rpm
> >>
> >>
> >>
> >>Hi,
> >>I want to patch the original RH-8.0 kernel but having difficulty.
> >>What am I doing wrong?
> >>(The reason for using this kernel is, that I need SCSI_AACRAID support,
> >>which does not yet come 'the original' 2.4 kernels.)
> >>
> >>Thank's - Rene
> >>
> >>------------
> >>
> >>[root_at_slslc02 src]# path -p0 < patch-2.4.18ctx10-ctx12
> >>-bash: path: command not found
> >>[root_at_slslc02 src]# patch -p0 < patch-2.4.18ctx10-ctx12
> >>can't find file to patch at input line 4
> >>Perhaps you used the wrong -p or --strip option?
> >>The text leading up to this was:
> >>--------------------------
> >>|diff -rc2P linux-2.4.18ctx-10/Makefile linux-2.4.18ctx-12/Makefile
> >>|*** linux-2.4.18ctx-10/Makefile Tue Mar 19 23:20:34 2002
> >>|--- linux-2.4.18ctx-12/Makefile Tue Jul 2 12:11:33 2002
> >>--------------------------
> >>File to patch:
> >>[root_at_slslc02 src]# rm linux-2.4
> >>rm: remove symbolic link `linux-2.4'? y
> >>[root_at_slslc02 src]# mv linux-2.4.18ctx10-ctx12 linux-2.4.18ctx-12
> >>[root_at_slslc02 src]# ln -s linux-2.4.18ctx-12 linux-2.4
> >>[root_at_slslc02 src]# patch -p0 < patch-2.4.18ctx10-ctx12
> >>patching file linux-2.4.18ctx-12/Makefile
> >>Hunk #1 FAILED at 2.
> >>1 out of 1 hunk FAILED -- saving rejects to file
> >>linux-2.4.18ctx-12/Makefile.rej
> >>patching file linux-2.4.18ctx-12/fs/proc/array.c
> >>Hunk #1 FAILED at 297.
> >>Hunk #2 FAILED at 315.
> >>2 out of 2 hunks FAILED -- saving rejects to file
> >>linux-2.4.18ctx-12/fs/proc/array.c.rej
> >>patching file linux-2.4.18ctx-12/include/linux/sched.h
> >>Hunk #1 FAILED at 292.
> >>Hunk #2 succeeded at 292 with fuzz 1 (offset -16 lines).
> >>Hunk #3 FAILED at 432.
> >>Hunk #4 succeeded at 983 with fuzz 2.
> >>2 out of 4 hunks FAILED -- saving rejects to file
> >>linux-2.4.18ctx-12/include/linux/sched.h.rej
> >>patching file linux-2.4.18ctx-12/include/net/route.h
> >>Hunk #1 FAILED at 161.
> >>1 out of 1 hunk FAILED -- saving rejects to file
> >>linux-2.4.18ctx-12/include/net/route.h.rej
> >>patching file linux-2.4.18ctx-12/kernel/exit.c
> >>Hunk #1 succeeded at 67 with fuzz 2.
> >>patching file linux-2.4.18ctx-12/kernel/fork.c
> >>Hunk #1 succeeded at 604 with fuzz 2.
> >>patching file linux-2.4.18ctx-12/kernel/sys.c
> >>Hunk #1 FAILED at 1068.
> >>1 out of 1 hunk FAILED -- saving rejects to file
> >>linux-2.4.18ctx-12/kernel/sys.c.rej
> >>patching file linux-2.4.18ctx-12/net/ipv4/af_inet.c
> >>Hunk #1 succeeded at 482 with fuzz 2.
> >>Hunk #2 FAILED at 492.
> >>1 out of 2 hunks FAILED -- saving rejects to file
> >>linux-2.4.18ctx-12/net/ipv4/af_inet.c.rej
> >>patching file linux-2.4.18ctx-12/net/ipv4/devinet.c
> >>Hunk #2 FAILED at 586.
> >>Hunk #3 FAILED at 723.
> >>Hunk #4 FAILED at 941.
> >>3 out of 4 hunks FAILED -- saving rejects to file
> >>linux-2.4.18ctx-12/net/ipv4/devinet.c.rej
> >>patching file linux-2.4.18ctx-12/net/socket.c
> >>Hunk #1 FAILED at 1765.
> >>1 out of 1 hunk FAILED -- saving rejects to file
> >>linux-2.4.18ctx-12/net/socket.c.rej
> >>
> >
>
>
> --
> ==== Rene Kapeller, WSLA/205, Paul Scherrer Institut, CH-5232 Villigen
> ==== phone: +41-56-3102397 mobile: +41-79-3059088 fax: +41-56-3104413
> ==== mailto:rene.kapeller_at_psi.ch http://people.web.psi.ch/kapeller/
>


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Fri 13 Dec 2002 - 03:49:14 GMT by hypermail 2.1.3