From: Burak (burak_at_duslersokagi.com)
Date: Mon 04 Nov 2002 - 21:27:42 GMT
----- Original Message -----
From: "Burak" <burak_at_duslersokagi.com>
To: <vserver_at_solucorp.qc.ca>
Sent: Monday, November 04, 2002 9:41 PM
Subject: Re: [vserver] socket source addresses (was: connect)
> > Paul;
> > Even when making outgoing connections, bind() is still used to select
the
> > source address before the connect(). Not calling bind() signals the
> > kernel to select an appropriate default source address. Eg.
> >
> > socket() /* create the socket */
> > ...
> > bind() /* set source address/port */
> > ...
> > connect() /* set destination address/port */
> >
> > If you have a source snippet, or minimal-example that demonstrates the
> > problem that you are having please do post it, as that will aid further
> > investigation.
> >
> > HTH,
> > -Paul
> > --
> > Nottingham, GB
>
> IPROOT="213.194.103.98 213.194.103.99 213.194.103.100"
> These are the ip address for my vserver.
>
> Please look at the attachment for my simple connect code.
> "gcc -o burak connect.c"
> If i try to bind 213.194.103.100 and connect somewhere with that ip
address
> i got;
> ./burak 213.194.112.66
> connect: Operation not permitted
>
> Then i change the bind ip address as 213.194.103.98 ( main ip for my
> vserver) and again try to use my code;
> ./burak 213.194.112.66
> connecttion with 213.194.103.98 ip address is done.
>
> It is completly my problem, and i need to fix that(need to use all the ip
> address on my vserver could used for connect). Thanks,
>
> Best Regards,
> Burak.
>
for the connect.c file please look there
www.duslersokagi.com/connect.c