From: Klavs Klavsen (klavs_at_EnableIT.dk)
Date: Mon 28 Oct 2002 - 08:36:16 GMT
Hi guys,
I recently got my RH73 vserver to work (on my gentoo-1.4rc1 host) by
copying it from my installation of it on the same HD - another
partition. It works fine.
Now I did the same with RH80 - except I got it from a friends computer
(which is a Celeron and not a Via C3 - don't know if that should make a
difference) and it doesn't work. I get the same Illegal Instruction
message when executing chroot /vservers/rh80 as I did with the vserver I
talked about in earlier postings.
Any ideas, as to what could be setup "wrong" on the rh80?
-- Regards, Klavs Klavsen--------------| This mail has been sent to you by: |------------ Klavs Klavsen - Open Source Consultant klavs_at_EnableIT.dk - http://www.EnableIT.dk
Get PGP key from www.keyserver.net - Key ID: 0x586D5BCA Fingerprint = 2873 188C 968E 600D D8F8 B8DA 3D3A 0B79 7E06 3C62 ----------------------[ I think that... ]----------------------- Open Source Software - Sometimes you get more than you paid for. -- unknown