From: Peter Kwan Chan (peterkwanchan_at_yahoo.com)
Date: Wed 14 Aug 2002 - 18:53:54 BST
Jason mentioned to me (privately) that his vservers were on different
LVM partitions, and I suggested to him that, as far as I know, hardlink
doesn't work across partition, so unification won't work.
Am I right?
Peter
-----Original Message-----
From: Tomas Fasth [mailto:tomas_at_euronetics.se]
Sent: Wednesday, August 14, 2002 11:19 AM
To: vserver_at_solucorp.qc.ca
Subject: Re: [vserver] Unfiied not working what am i doing wrong
Jason, all,
I think the problem you have is lingering mount --bind on proc and
dev/log. Try umount proc dev/log and then try again to remove it.
That will also explain why your copy gets so big. You were copying
the whole random access memory: /dev/kmem :)
// Tomas
Jason Silverglate wrote:
> True but unifing is supposed to not make it 1.2GB but link all the
> binaries together.
>
> jason
>
> At 03:18 PM 8/13/2002, you wrote:
>
>> When I tried creating a vserver off of the / it was 1.3 GB (default
>> redhat 7.2
>> install)... You then have to trim down everything you wont need. Or,
>> create a
>> new, base install, and copy that into the directory.
>>
>> On 13 Aug 2002 at 15:06, Jason Silverglate wrote:
>>
>> > Well i tried both ways
>> >
>> > I tried creating it from vserver1 which is a vserver. and it only
>> created
>> > the /proc /dev dir. So i then tried and created it from the /
which is
>> > what this is and the size still comes out to be 1GB instead of the
30MB
>> >
>> > Jason
>> >
>> > At 02:04 PM 8/13/2002, you wrote:
>> > >Its hard to tell from the output, but did you select the right
>> server to
>> > >clone from?
>> > >
>> > >Peter
>> > >
>> > >-----Original Message-----
>> > >From: Jason Silverglate [mailto:jason_at_pwebtech.com]
>> > >Sent: Tuesday, August 13, 2002 12:41 PM
>> > >To: vserver_at_solucorp.qc.ca
>> > >Subject: [vserver] Unfiied not working what am i doing wrong
>> > >
>> > >[root_at_vserver1 vserver2]# ls
>> > >dev proc
>> > >
>> > >Those are the only directories i get when i do this config for
>> > >unification
>> > >
>> > >
>> > > lqqqqqqqqqqqqqqqqqqqqq Vserver basic
setup
>> > >qqqqqqqqqqqqqqqqqqqqqqk
>> > > x
>> > >x
>> > > x
>> > >lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
>> > > xtop
>> > >xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx x
>> > > xVserver name (max 10 chars)
>> > >xvserver2 x x
>> > > xVserver
>> > >description xvserver2 x x
>> > > xClone
>> > >vserver x/ vx x
>> > > xUnified mode x[X] Share
disk
>> > >space x x
>> > > xNetworking
>> > >xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx x
>> > > xHost
>> > >name xvserver2.woof.com x x
>> > > x xUp to 16 IP
>> > >numbers x x
>> > > xIP
>> > >number(s) x<IP> x x
>> > > xInstall IP on
>> > >device xeth0 x x
>> > > xNIS
>> > >domainname x x x
>> > > xExtra
>> > >xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx x
>> > > xStart server x[ ] at boot
>> > >time x x
>> > > xNice
>> > >level x x x
>> > > xAvailable flags xlock nproc
>> sched
>> > >hideinfo privatex x
>> > > xFlags xlock
>> > >nproc x x
>> > > xVserver ulimit x-H -u
>> > >1000 x x
>> > > xServices
>> > >xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx x
>> > > xcrond x[X]
Scheduled
>> > >tasks x x
>> > > xhttpd x[ ] Web
>> > >server x x
>> > > xsshd x[X] Secure
>> shell
>> > >server x x
>> > > xsyslog x[X] Message
>> > >logger x x
>> > > xxinetd x[X] On
>> demand inet
>> > >
>> > >service x x
>> > > xShared
>> > >directories xqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqx x
>> > > xDirectory x/usr
>> > > x x
>> > > xDirectory x/
>> > > x x
>> > > xDirectory x/lib
>> > > x x
>> > > xDirectory x/var
>> >
>> > __________________
>> > Jay Silver jason_at_pwebtech.com ICQ 103463692
>> > Pegasus Web Technologies
>> > http://www.pwebtech.com
>> > Web Hosting and Dedicated Servers
>> >
>> >
>>
>> --
>> Russell Anthony <ranthony_at_siteturn.com>
>> Network Development / Administration
>
>
> __________________
> Jay Silver jason_at_pwebtech.com ICQ 103463692
> Pegasus Web Technologies
> http://www.pwebtech.com
> Web Hosting and Dedicated Servers
>
>